Links to Security Systems
GSA and HubZone Companies

www.AnalogFireWall.com
Serving Department of State and Corporate America

Click for SCIF Presentation

THT-100EL: FULL SECURITY CLEAR POLYCARBONATE TURNSTILE



$13,324.00
(to purchase call 847-746-3559 x11)

Designed to provide high security access control while maintaining aesthetic appeal, the THT-100EL is fabricated from anodized aluminum construction with 1-1/4"x 3" clear polycarbonate arms. Curved shield assembly uses 5/16" curved acrylic. Full stainless steel circular ceiling canopy provides the clean, finished look of a revolving door. Heavy-duty, low voltage, 24 VDC electromechanical operating mechanism is self-centering and cushioned by a hydraulic, adjustable shock absorber. Also available in stainless steel, bronze, brass, or powder coated steel. Standard configuration is 3 rotor sections, 120 degrees apart, but can also be 4 rotor sections, 90 degrees apart. Normally open, momentary dry contact is required to release turnstile. Shown above with optional handicap gate (THG-51EL).

 

Features and Options

Indicator Lights Set of red and green lights indicate if turnstile is locked or unlocked. One set per electrically controlled direction.
Electrical Controls Electrical controls for entry only, exit only or independent bi-directional electrical controls for both entry and exit.
Time-out relay Relay to automatically relock turnstile within a preset time if a person cards in and unlocks turnstile but does not go through.
Rotation Detection Switch Provides a Form "C" contact closure to the access control system for remote counting and monitoring of turnstile rotations.
Free or Locked Operation For mechanical operation, direction is always locked or always free rotating.
Remote Pushbutton Allows turnstile to be released from remote location for one rotation.
Electronic Key Bypass Key to allow turnstile to be held open, overriding card reader.
Mechanical Key Bypass Key allow fail-lock direction to be opened during power failure. Standard for fail-lock applications.
Solenoid Activation Switch Provides a Form "C" contact closure to access control system that turnstile solenoid has been activated.
Card Reader Mounting Plate Plate to allow mounting of reader on shield post.
Hydraulic Speed Control Heavy duty shock and gear system that controls rotation speed of turnstile to minimize turnstile abuse and provide increased ease of use. Standard feature for polycarbonate turnstiles.
Voltage Transformer to step down from 110 VAC or 220 VAC.
Home Position Switch Provides a Form "C" contact closure to the access control system when the turnstile is in home position.
Pulse Relay Allows one rotation per valid "go" signal regardless fo the signal length.
Fail-lock or Fail-safe For electrically controlled direction. Status of turnstile when there is no power. Fail-lock direction is locked, fail-safe is free wheeling.

www.AVLELEC.com, inc.
8641 South Warhawk Road, Conifer Colorado  80433
Tel: 303-670-1099 ext. 11 * FAX: 303-679-8949
email: Patrick.McAllister@avlelec.com